Bramah 3061 Kompact Egress Mortice Nightlatch Without Snib
This Bramah Kompact 3061 escape nightlatch without snib is designed to automatically hold the door closed and locked while allowing immediate escape with a handle. These nightlatch locks can be used in conjunction with electric releases.
£226.17
This Bramah Kompact 3061 escape nightlatch without snib is designed to automatically hold the door closed and locked while allowing immediate escape with a handle.
These nightlatch locks can be used in conjunction with electric releases.
Supplied with a keep.
| Handing | Left Hand, Right Hand |
|---|---|
| Description | Lock Only, Lock Set |
Related products
-
Mortice Locks, 6 Lever and 5 Lever (non BS) Mortice Locks, Metal Door Mortice Lock Cases
Willenhall M5 Non British Standard 5 Lever 2″ Cranked 19mm Extended Forend Mortice Sashlock
Quick View
Mortice Locks, 6 Lever and 5 Lever (non BS) Mortice Locks, Metal Door Mortice Lock CasesWillenhall M5 Non British Standard 5 Lever 2″ Cranked 19mm Extended Forend Mortice Sashlock
The Willenhall M3 mortice sash lock features 5 levers and a narrow body. This version has a cranked 175mm faceplate with either 19mm or 25mm widths.
SKU: n/a -
Door Locks, Metal Door Mortice Lock Cases, Mortice Locks, Multipoint & UPVC, Multipoint Gearboxes
Hooply Genuine Multipoint Gearbox – Key Wind
Quick View
Door Locks, Metal Door Mortice Lock Cases, Mortice Locks, Multipoint & UPVC, Multipoint GearboxesHooply Genuine Multipoint Gearbox – Key Wind
The Hooply multipoint gearbox has Faceplate dimensions of 240mm x 24mm, Centers of 68mm, and a Backset of 60mm. This lock case has Fingerbolts – see HOO002 for the standard deadbolt version. It is commonly used on site containers and security steel doors.
Operation:Â Key Wind
Latch reversal:Â Depending on the date of manufacture either:
1. To reverse the latch, undo the screw on top of the lock case and push the silver button up and the latch should pop out. Twist and reinsert the screw.
2. Using a screwdriver or similar insert into the round hole in the back edge of the lock case behind the latch. Push the entire latch bolt forward until the bolt clears the faceplate and can be rotated. Spin the bolt through 180 degrees. remove the screwdriver from the back of the case and the bolt will move back into position.
SKU: HOO001 -
British Standard Mortice Locks, Locks & Security, Mortice Locks
TSS Retro Fit British Standard 5 Lever Mortice Sashlock
Quick View
British Standard Mortice Locks, Locks & Security, Mortice LocksTSS Retro Fit British Standard 5 Lever Mortice Sashlock
This British Standard TSS mortice sash lock has been designed with the same dimensions as classic mortice sash locks with a 40mm backset. These BS3621 mortice sash locks meet the requirements of British Standard BS3621:2007.
SKU: n/a
