Guardian 6 Gauge Copy Mortice Key Blank
TS304 Guardian 6g Copy Steel Mortice Blank
£0.91
Related products
-
-
Mortice Locks, 6 Lever and 5 Lever (non BS) Mortice Locks
Willenhall M5 Non British Standard 5 Lever 2″ Straight 19mm Extended Forend Mortice Sashlock
Quick View
Mortice Locks, 6 Lever and 5 Lever (non BS) Mortice LocksWillenhall M5 Non British Standard 5 Lever 2″ Straight 19mm Extended Forend Mortice Sashlock
The Willenhall M3 mortice sash lock features 5 levers and a narrow body. This version has an extended 175mm forend with either 19mm or 25mm widths.
SKU: n/a -
Mortice Locks, 6 Lever and 5 Lever (non BS) Mortice Locks, Metal Door Mortice Lock Cases
Willenhall M5 Non British Standard 5 Lever 2″ Cranked 19mm Extended Forend Mortice Sashlock
Quick View
Mortice Locks, 6 Lever and 5 Lever (non BS) Mortice Locks, Metal Door Mortice Lock CasesWillenhall M5 Non British Standard 5 Lever 2″ Cranked 19mm Extended Forend Mortice Sashlock
The Willenhall M3 mortice sash lock features 5 levers and a narrow body. This version has a cranked 175mm faceplate with either 19mm or 25mm widths.
SKU: n/a -
Door Locks, Metal Door Mortice Lock Cases, Mortice Locks, Multipoint & UPVC, Multipoint Gearboxes
Hooply Genuine Multipoint Gearbox – Key Wind
Quick View
Door Locks, Metal Door Mortice Lock Cases, Mortice Locks, Multipoint & UPVC, Multipoint GearboxesHooply Genuine Multipoint Gearbox – Key Wind
The Hooply multipoint gearbox has Faceplate dimensions of 240mm x 24mm, Centers of 68mm, and a Backset of 60mm. This lock case has Fingerbolts – see HOO002 for the standard deadbolt version. It is commonly used on site containers and security steel doors.
Operation: Key Wind
Latch reversal: Depending on the date of manufacture either:
1. To reverse the latch, undo the screw on top of the lock case and push the silver button up and the latch should pop out. Twist and reinsert the screw.
2. Using a screwdriver or similar insert into the round hole in the back edge of the lock case behind the latch. Push the entire latch bolt forward until the bolt clears the faceplate and can be rotated. Spin the bolt through 180 degrees. remove the screwdriver from the back of the case and the bolt will move back into position.
SKU: HOO001
