Roto
Showing all 7 results
-
Door Locks, Multipoint & UPVC, Multipoint Gearboxes
Elite Genuine Multipoint Gearbox – Automatic Locking
Quick View
Door Locks, Multipoint & UPVC, Multipoint GearboxesElite Genuine Multipoint Gearbox – Automatic Locking
Clear35mm45mmElite automatic gearboxes are available as a 35mm or 45mm backset, single spindle lock. There’s no need for a double spindle version as that feature is not used on an automatic locking gearbox. The same gearbox is used for both standard and heritage versions of the Elite automatic gearbox.
Elite gearboxes measure 200mm high x backset + 19mm. Be sure to account for 2mm for the faceplate when measuring the backset.
Gearbox deadbolts project 20mm and are 32mm high. The latch is 30mm high and projects 10mm. There is 63mm between the bottom of the latch and the top of the deadbolt.
Centres are positioned at 92mm, with the top spindle being 122mm from the bottom of the case. Single spindle locks have a round hole where the second spindle would normally be located. The gearbox is pierced to accept a bolt through fixing 19mm from the top spindle, and the slot above that, for fixings is 42mm above the spindle.
As the door is closed, the small latch on each of the external auto-latch cases will be triggered as it touches the keep frame. This will trigger the auto latches to be thrown so that they engage into the keeps. There is no need for the handle to be lifted. The door can be deadlocked by turning the key. All locking points can be retracted using the key.
This is the auto locking or slam shut version.
We stock a range of associated products for Elite Auto gearboxes, including multipoint door locks, keeps, spindles, handles and accessories.
SKU: n/a -
Door Locks, Multipoint & UPVC, Multipoint Gearboxes
Elite Genuine Multipoint Gearbox – Key Wind
Quick View
Door Locks, Multipoint & UPVC, Multipoint GearboxesElite Genuine Multipoint Gearbox – Key Wind
Elite keywind gearboxes are available as a 45mm backset, single spindle lock. There’s no need for a double spindle version as that feature is not used on an automatic locking gearbox. The same gearbox is used for both standard and heritage versions of the Elite automatic gearbox.
Elite gearboxes measure 200mm high x backset + 19mm. Be sure to account for 2mm for the faceplate when measuring the backset.
Gearbox deadbolts project 20mm and are 32mm high. The latch is 30mm high and projects 10mm. There is 63mm between the bottom of the latch and the top of the deadbolt.
Centres are positioned at 62mm and 92mm, with the top spindle being 122mm from the bottom of the case. Single spindle locks have a round hole where the second spindle would normally be located. The gearbox is pierced to accept a bolt through fixing 19mm from the top spindle, and the slot above that, for fixings is 42mm above the spindle.
We stock a range of associated products for Elite Keywind gearboxes, including multipoint door locks, keeps, spindles, handles and accessories.
SKU: ELITECASEKW45 -
Door Locks, Multipoint & UPVC, Multipoint Gearboxes
Roto C600 Genuine Multipoint Gearbox – Key Wind
Quick View
Door Locks, Multipoint & UPVC, Multipoint GearboxesRoto C600 Genuine Multipoint Gearbox – Key Wind
Clear35mm45mm50mm55mm65mmC600 gearboxes measure 213mm x backset + 18mm. They feature a 30mm x 10mm latch, a 30mm high bolt and 57.5mm between the latch and deadbolt. Gearboxes feature a distinctive elongated piercing that measures between 136mm and 173mm from the centre of the euro cut out, to accept bolts for handles.
Roto C600 multipoint door lock gearboxes feature a “whisper latch” as standard fitment. This latch has a central plastic component to ensure that the door closes quietly. It’s worth noting that Roto did supply these locks with other types of latch, which although rare, may not feature the plastic insert.
European markets feature locks with 25mm up to 80mm backsets, but locks with 35mm and 45mm are sold in the UK. When measuring the backset, allow 2-3mm for the faceplate, so a 35mm backset gearbox will measure 32mm when not fixed to the strip.
We stock a range of associated products for Roto C600 gearboxes, including multipoint door locks, keeps, spindles, handles and accessories.
SKU: n/a -
Door Locks, Multipoint & UPVC, Repair Locks
Roto H500 Elite Inliten Passive Genuine Multipoint Gearbox – Lift Lever
Quick View
Door Locks, Multipoint & UPVC, Repair LocksRoto H500 Elite Inliten Passive Genuine Multipoint Gearbox – Lift Lever
This Elite Standard gearbox is suitable for a passive door on a pair of French doors.
Passive locks are fitted to the secondary (or passive) door on a pair of French doors. They are used in conjunction with the primary lock, which is a normal multipoint door lock, fitted to the main door. Locking is achieved by shoot bolts which secure the secondary door leaf to the frame when the door is locked.
SKU: ELITESLAVECASE35 -
Door Locks, Multipoint & UPVC, Multipoint Gearboxes
Roto H500 MVD500 Elite Inliten Genuine Multipoint Gearbox – Lift Lever
Quick View
Door Locks, Multipoint & UPVC, Multipoint GearboxesRoto H500 MVD500 Elite Inliten Genuine Multipoint Gearbox – Lift Lever
Elite gearboxes are available as a 35mm single spindle lock or with a 35mm or 45mm double spindle. Gearboxes measure 200mm high x backset + 19mm. Be sure to account for 2mm for the faceplate when measuring the backset.
Gearbox deadbolts project 20mm and are 32mm high. The latch is 30mm high and projects 10mm. There is 63mm between the bottom of the latch and the top of the deadbolt.
Centres are positioned at 62mm and 92mm, with the top spindle being 122mm from the bottom of the case. Single spindle locks have a round hole where the second spindle would normally be located. The gearbox is pierced to accept a bolt through fixing 19mm from the top spindle, and the slot above that, for fixings, is 42mm above the spindle.
We stock a range of associated products for Elite Standard gearboxes, including multipoint door locks, keeps, spindles, handles, and accessories.
Note: Some variants will be stamped Inliten – 45mm is currently only available in a double spindle – Part Number ELITECASE45 however if there is a screwhole under the lever on the existing handles then the handle set will need replacing and screw holes repositioned.
SKU: ELITECASE35 -
Door Locks, Multipoint & UPVC, Multipoint Gearboxes
Roto H650 Genuine Multipoint Gearbox – Lift Lever
Quick View
Door Locks, Multipoint & UPVC, Multipoint GearboxesRoto H650 Genuine Multipoint Gearbox – Lift Lever
Clear25mm28mm35mm40mm45mm50mm55mm65mmRoto H650 gearboxes are dimensionally the same as the H600 series but feature internal upgrades. They are available in a 25mm, 28mm, 35mm, 45mm, backsets with a single spindle operation.
The H650 gearbox measures 212mm high by the backset + 15mm. The latch is 29mm high, the deadbolt is 30mm high and there is 58mm between the bottom of the latch and the top of the deadbolt. Gearboxes are fitted to faceplates with three screws. The top to middle screw measures 70mm, whereas the middle to bottom screw measures 125mm.
Roto H650 multipoint door lock gearboxes feature a “whisper latch” as standard fitment. This latch has a central plastic component to ensure that the door closes quietly. It’s worth noting that Roto did supply these locks with other types of latch, which although rare, may not feature the plastic insert.
European markets feature locks with 25mm up to 80mm backsets, but locks with 35mm and 45mm are sold in the UK. When measuring the backset, allow 2-3mm for the faceplate, so a 35mm backset gearbox will measure 32mm when not fixed to the strip.
We stock a range of associated products for Roto H650 gearboxes, including multipoint door locks, keeps, spindles, handles and accessories.
Operation: Lift lever
Latch reversal: Locate the small hole above the latch and insert a 2mm Allen key which should go down at a slight angle, push down on the Allen key and at the same time pull the latch out, reverse the latch, and reinsert, push the latch right in and test to ensure it is connected properly.
SKU: n/a
