Winkhaus
Showing all 12 results
-
Door Locks, Multipoint & UPVC, Refurb Kit
Winkhaus 2 Thunderbolt Refurb Kit – Split Spindle Version
Quick ViewDoor Locks, Multipoint & UPVC, Refurb KitWinkhaus 2 Thunderbolt Refurb Kit – Split Spindle Version
Clear35mm45mmThis Winkhaus kit contains all of the necessary components to refurbish any Winkhaus Thunderbolt Multipoint Door Lock with the following characteristics: A latch and deadbolt centre case (split spindle version), and 2 thunderbolt cases
These kits offer a convenient way to repair and recommission failed multipoint door lock mechanisms, in a package no larger than a pizza box!
The vast majority of multipoint locks require replacement due to a failure of one or more of the locking points, the spindle follower, or internal parts within the main gearbox. In most cases the faceplate and drive rods themselves are undamaged and able to be re-used. Our Refurb Kits include all the bolt on components of the multipoint lock system, allowing a complete replacement of all these critical parts and a total overhaul of the lock.
One major benefit of this approach is that the kit comes in a package so small that it becomes viable to hold stock of everything required to refurbish all popular locks from manufacturers found in the UK. By eliminating the need to identify and order a full length like for like replacement, the Refurb Kit system enables a lock to be removed, repaired, and recommissioned, quickly and all in a single visit without ever having to identify the exact model number, wait for a delivery or handle a parcel over 2 metres long. Simply select the refurb kit that suits the gearbox and locking point options from your van stock, fit the components to the old locks faceplate, and reinstate the lock safe in the knowledge all moving and locking components are brand new.
SKU: n/a -
Door Locks, Electronic Multipoint Locks, Multipoint & UPVC
Winkhaus AV2 + Latch Deadbolt 2 Hooks Flat 16mm Faceplate Autolocking Multipoint Door Lock
Quick ViewDoor Locks, Electronic Multipoint Locks, Multipoint & UPVCWinkhaus AV2 + Latch Deadbolt 2 Hooks Flat 16mm Faceplate Autolocking Multipoint Door Lock
35mm45mm55mmClearLeft HandRight HandHooks on this lock are automatically engaged as the door is closed without needing to lift the handle. The handle will retract the hooks from the inside and a further turn of the key deadlocks the door.
To transform this multipoint lock into an electronic locking solution, simply attach the 12V DC Winkhaus AV2 motor (available separately) and connect using the Winkhaus AV2 cable to the wide range of Winkhaus access control products available.
Backset: 35mm 45mm or 55mm.
Centres: 92mm.
Operation: Automatic Locking.
Latch Reversal: Handed – Non Reversible See Attached Handing Chart.
SKU: n/a -
Door Locks, Electronic Multipoint Locks, Multipoint, Multipoint & UPVC
Winkhaus AV2 + Latch Deadbolt 2 Hooks Flat 20mm Faceplate Autolocking Multipoint Door Lock
Quick ViewDoor Locks, Electronic Multipoint Locks, Multipoint, Multipoint & UPVCWinkhaus AV2 + Latch Deadbolt 2 Hooks Flat 20mm Faceplate Autolocking Multipoint Door Lock
45mm55mmFlat 20mmSingle 8mmClearLeft HandRight HandHooks on this lock are automatically engaged as the door is closed without needing to lift the handle. The handle will retract the hooks from the inside and a further turn of the key deadlocks the door.
To transform this multipoint lock into an electronic locking solution, simply attach the 12V DC Winkhaus AV2 motor (available separately) and connect using the Winkhaus AV2 cable to the wide range of Winkhaus access control products available.
SKU: n/a -
Door Locks, Multipoint & UPVC, Multipoint Gearboxes
Winkhaus AV2 Genuine Multipoint Gearbox – Automatic Locking
Quick ViewDoor Locks, Multipoint & UPVC, Multipoint GearboxesWinkhaus AV2 Genuine Multipoint Gearbox – Automatic Locking
35mm45mm55mmClearLeft HandRight HandThese Winkhaus gearboxes are supplied in 35mm, 45mm and 55mm backsets and 92mm centres. The gearboxes are held onto the strip by 2 rivets and a screw. Spare rivets can be ordered under part number 2241553.
All Winkhaus gearboxes, apart from the AV4 measure 185mm high x backset + 15mm, making them the smallest gearboxes on the market. They measure 64mm between the latch and deadbolt and 63mm from the spindle to the top of the gearbox. They also feature a groove above the spindle to aid in the fitment of handles with a screw above the lever.
Winkhaus AV2 multipoint lock gearboxes feature an alloy sprung latch and nickel-plated steel deadbolt. Most AV2 locks also feature an independent central deadbolt, but a latch-only version of the lock is also available.
AV2 gearboxes are distinctive as they are handed. Certain models have a latch reversal screw which, in theory, makes it possible to reverse the latch on an AV2 gearbox. However, the hooks on the lock cannot be reversed and many AV2 gearboxes will have the latch reversal screw blanked off, so you should choose the appropriate handed gearbox when replacing a broken lock.
Winkhaus gearboxes are attached to the faceplate with a set of rivets. These can be easily removed and replaced for gearbox swaps but makes Winkhaus relatively unique (and therefore easier to identify) in the market. Please refer to our guide and video on how to replace a Winkhaus gearbox for full details.
Please note that you may have encountered a really old Winkhaus gearbox that is attached to the faceplate with screws, with a passivated yellow finish. The sticker on the side (red = key wind and blue = lift lever) will denote the operation of the lock. These locks were handed and are no longer available.
Upon closing the door the snib below the hooks engages with the strike plate throwing the hook bolts.
The hook bolts are now deadlocked.
To further secure the door a turn of the key will throw the central deadbolt.
To unlock turn the key to withdraw the deadlock then either turn the key again to withdraw the latch and hook bolts or pull the handle down to withdraw the latch and hook bolts.
We stock a range of associated products for Winkhaus AV2 gearboxes, including multipoint door locks, keeps, spindles, handles and accessories.
SKU: n/a -
Door Locks, Electronic Multipoint Locks, Multipoint, Multipoint & UPVC
Winkhaus AV2 Latch Deadbolt 2 Hooks Radius 20mm Faceplate Multipoint Door Lock – Autolocking
Quick ViewDoor Locks, Electronic Multipoint Locks, Multipoint, Multipoint & UPVCWinkhaus AV2 Latch Deadbolt 2 Hooks Radius 20mm Faceplate Multipoint Door Lock – Autolocking
35mm45mm55mmFlat 20mm - Round EndsLeft HandRight HandClearAutomatic LockingThis Winkhaus AV2 multipoint door lock features 2 Hooks, 1 Deadbolt & 1 Latch.
The AV2 autolock multipoint lock was introduced by Winkhaus in 2008 and it was designed to offer convenience to users and to maintain security standards. The result is a lock that operates as soon as the door is closed, without the need to lift the handle to engage the hooks.
The quickest way to identify the product, before removing it from the door, is to check the faceplate. You’ll spot a Winkhaus logo and, often, a Secured by Design logo. The AV2 version of the Winkhaus is identified by checking the operation of the lock.
Usefully, all Winkhaus locks feature the same routing details. Therefore, if you wish to change the locking operation, or upgrade to automatic locking, its a straightforward process. New keeps and handles may be required.
Winkhaus AV2 autolock multipoints are often specified on fire doors which require multipoint locking. Fire Door tests require doors to be tested in the latch position only, without the locking points being engaged. This is to simulate how a door may be commonly closed, however, it can create problem with achieving a satisfactory fire test result as the door leaf can bow and twist in the heat. The problem is eliminated with AV2 as the lock engages automatically in three positions helping to hold the door leaf in place against the intumescent seals and thereby achieving a fire door rating. Please note that the fitment of an AV2 lock does not mean that the door meets fire door standards and you should take specific advice.
Av2 autolocks are commonly fitted with a motor to allow for motorised locking and unlocking of doors. The locked door can be opened from the inside as usual with the door handle, or from both inside and outside using potential hands free opening products such as fingerprint, audio/visual intercom systems or even face recognition.
All Winkhaus gearboxes, apart from the AV4 measure 185mm high x backset + 15mm, making them the smallest gearboxes on the market. They measure 64mm between the latch and deadbolt and 63mm from the spindle to the top of the gearbox. They also feature a groove above the spindle to aid in the fitment of handles with a screw above the lever.
Winkhaus AV2 multipoint lock gearboxes feature an alloy sprung latch and nickel plated steel deadbolt. Most AV2 locks also feature an independent central deadbolt, but a latch only version of the lock is also available.
AV2 gearboxes are distinctive as they are handed. Certain models have a latch reversal screw which, in theory, makes it possible to reverse the latch on an AV2 gearbox. However, the hooks on the lock cannot be reversed and many AV2 gearboxes will have the latch reversal screw blanked off, so you should chose the appropriate handed gearbox when replacing a broken lock.
Winkhaus gearboxes are attached to the faceplate with a set of rivets. These can be easily removed and replaced for gearbox swaps but makes Winkhaus relatively unique (and therefore easier to identify) in the market. Please refer to our guide and video on how to replace a Winkhaus gearbox for full details.
Please note that you may have encountered a really old Winkhaus gearbox that is attached to the faceplate with screws, with a passivated yellow finish. The sticker on the side (red = key wind and blue = lift lever) will denote the operation of the lock. These locks were handed and are no longer available.
The autoLock AV2 features two solid hooks which throw automatically when the door is closed, ensuring complete claw engagement and security against the lock being pushed back. As the door locks automatically, a security risk is eliminated for users that may find it challenging to lift a lever.
Please note that these hook boxes are handed as they sit slightly offset, ensuring greater compression against the frame.
Winkhaus Autolock AV2 hooks also have the added benefit of being thrown when the door is closed, ensuring that the door is held in place across its entire length. This helps prevent doors from becoming warped or bowed.
Operation: Automatic Locking
SKU: n/a -
Door Locks, Electronic Multipoint Locks, Multipoint & UPVC
Winkhaus AV2 Motor
The Winkhaus AV2 motor is compatible with all Winkhaus AV2 and AV3 automatic multipoint locks, to create an electronic locking device for use with access control systems.
The AV2 and AV3 range of Autolocking mechanisms have the optional capability of becoming an electronic access controlled locking system. The lock is designed to accept this “screw-on” 12v electronic motor which can then be controlled by a range of access control systems. Please note that the machine screws which secure the motor to the faceplate feature reverse threads and must be turned anti-clockwise to tighten them.
The AV2 connecting cable is not included and must be bought separately
Please note: Due to its nature this item is sealed with a tamper-evident security seal. Please confirm the item matches the description on the invoice, and is needed, before breaking this seal. Once this seal has been broken, or the item has been removed from its packaging, it is considered to be used cannot be returned unless it becomes faulty. Returns for faulty items will be handled in accordance with the relevant manufacturers’ returns procedures.
SKU: n/a -
Door Locks, Electronic Multipoint Locks, Multipoint & UPVC
Winkhaus Av2 Multipoint Cable
This genuine Winkhaus AV2 motor connecting cable is required for use when installing AV2 motors with Winkhaus multipoint locks.
The cable features a unique plug which connects to a corresponding socket on the Winkhaus motor, and features colour-coded cores for simple installation.
Supplied in grey with 6m length
SKU: 2522881 -
Door Locks, Multipoint & UPVC, Multipoint Gearboxes
Winkhaus S.E.A Genuine Multipoint Gearbox – Key Wind
Quick ViewDoor Locks, Multipoint & UPVC, Multipoint GearboxesWinkhaus S.E.A Genuine Multipoint Gearbox – Key Wind
35mm45mm55mmSingle 8mmClear92mmAll Winkhaus gearboxes, apart from the AV4 measure 185mm high x backset + 15mm, making them the smallest gearboxes on the market. They measure 64mm between the latch and deadbolt and 63mm from the spindle to the top of the gearbox. They also feature a groove above the spindle to aid in the fitment of handles with a screw above the lever.
Winkhaus Cobra locks always feature a latch and deadbolt in the gearbox. They are available in lift lever, split spindle and key wind operation. These are easily identifiable by the sticker on the side of the gearbox. If the writing is blue, that’s the lift lever, if it’s green, then the lock is split spindle, whereas red means key wind. We often will only stock the green, split spindle locks, where both a lift lever and split spindle version are available. That’s because the split spindle can be used as a lever-operated lock by inserting a solid spindle all the way through the follower. There’s also no price difference between the locks, so the added versatility of the split spindle lock makes it a suitable replacement for a larger range of locks.
Winkhaus gearboxes are attached to the faceplate with a set of rivets. These can be easily removed and replaced for gearbox swaps but makes Winkhaus relatively unique (and therefore easier to identify) in the market. Please refer to our guide and video on how to replace a Winkhaus gearbox for full details.
Please note that you may have encountered a really old Winkhaus gearbox that is attached to the faceplate with screws, with a passivated yellow finish. The sticker on the side (red = key wind and blue = lift lever) will denote the operation of the lock. These locks were handed and are no longer available.
We stock a range of associated products for Winkhaus Cobra gearboxes, including multipoint door locks, keeps, spindles, handles and accessories.
Operation: Key wind
Latch reversal: Push in latch and a screw will appear in the back of the lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace the screw.
SKU: n/a -
Door Locks, Multipoint & UPVC, Multipoint Gearboxes
Winkhaus S.E.A Genuine Multipoint Gearbox – Lift Lever
Quick ViewDoor Locks, Multipoint & UPVC, Multipoint GearboxesWinkhaus S.E.A Genuine Multipoint Gearbox – Lift Lever
45mm55mmSingle 8mmClear92mmAll Winkhaus gearboxes, apart from the AV4 measure 185mm high x backset + 15mm, making them the smallest gearboxes on the market. They measure 64mm between the latch and deadbolt and 63mm from the spindle to the top of the gearbox. They also feature a groove above the spindle to aid in the fitment of handles with a screw above the lever.
Winkhaus Cobra locks always feature a latch and deadbolt in the gearbox. They are available in lift lever, split spindle and key wind operation. These are easily identifiable by the sticker on the side of the gearbox. If the writing is blue, that’s the lift lever, if it’s green, then the lock is split spindle, whereas red means key wind. We often will only stock the green, split spindle locks, where both a lift lever and split spindle version are available. That’s because the split spindle can be used as a lever operated lock by inserting a solid spindle all the way through the follower. There’s also no price difference between the locks, so the added versatility of the split spindle lock makes it a suitable replacement for a larger range of locks.
Winkhaus gearboxes are attached to the faceplate with a set of rivets. These can be easily removed and replaced for gearbox swaps but makes Winkhaus relatively unique (and therefore easier to identify) in the market. Please refer to our guide and video on how to replace a Winkhaus gearbox for full details.
Please note that you may have encountered a really old Winkhaus gearbox that is attached to the faceplate with screws, with a passivated yellow finish. The sticker on the side (red = key wind and blue = lift lever) will denote the operation of the lock. These locks were handed and are no longer available.
We stock a range of associated products for Winkhaus Cobra gearboxes, including multipoint door locks, keeps, spindles, handles and accessories.
SKU: n/a -
Door Locks, Multipoint & UPVC, Multipoint Gearboxes
Winkhaus Scorpion Genuine Multipoint Gearbox – Lift Lever or Split Spindle
Quick ViewDoor Locks, Multipoint & UPVC, Multipoint GearboxesWinkhaus Scorpion Genuine Multipoint Gearbox – Lift Lever or Split Spindle
All Winkhaus gearboxes, apart from the AV4 measure 185mm high x backset + 15mm, making them the smallest gearboxes on the market. They measure 64mm between the latch and hook bolt and 63mm from the spindle to the top of the gearbox. They also feature a groove above the spindle to aid in the fitment of handles with a screw above the lever.
Winkhaus Cobra locks always feature a latch and deadbolt in the gearbox. They are available in lift lever, split spindle and key wind operation. These are easily identifiable by the sticker on the side of the gearbox. If the writing is Blue, that’s a lift lever, if it’s Green, then the lock is a split spindle, whereas Red means key wind. We often will only stock the Green, split spindle locks, where both a lift lever and split spindle version are available. That’s because the split spindle can be used as a lever-operated lock by inserting a solid spindle all the way through the follower. There’s also no price difference between the locks, so the added versatility of the split spindle lock makes it a suitable replacement for a larger range of locks.
Winkhaus gearboxes are attached to the faceplate with a set of rivets. These can be easily removed and replaced for gearbox swaps but makes Winkhaus relatively unique (and therefore easier to identify) in the market. Please refer to our guide and video on how to replace a Winkhaus gearbox for full details.
Please note that you may have encountered a really old Winkhaus gearbox that is attached to the faceplate with screws, with a passivated yellow finish. The sticker on the side (red = key wind and blue = lift lever) will denote the operation of the lock. These locks were handed and are no longer available.
We stock a range of associated products for Winkhaus Scorpion gearboxes, including multipoint door locks, keeps, spindles, handles and accessories.
Operation: Lift lever or split spindle
Latch reversal: Push in latch and a screw will appear in the back of the lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace the screw.
SKU: WINKSCORPCASE35