Multipoint & UPVC

This Lockmaster AutoEngage multipoint door lock features 1 Deadbolt, 1 Latch & 2 Autolatches.

The Yale Lockmaster AutoEngage multipoint lock features automatic locking and is unique in the lockmaster range. It is also known as a “slam shut” lock.

Two security latches automatically fire when the door is closed, giving up to 20mm deadbolt engagement into the keeps. The is no need to lift the handle to achieve locking but the door can be deadlocked via the key or thumb turn.

Yale AutoEngage multipoint door locks feature distinctive deadlatch locking points, which closely resemble a standard latch, found in the main gearbox.

These locks are suitable for both timber and composite doors and are available as a Classic, with the main gearbox in the middle of the door, and Heritage, where the main gearbox is situated at the height of a traditional timber door night latch.

These locks will commonly be fitted with contemporary pull handles, rather than lever on plate multipoint lock handles.

Yale Lockmaster AutoEngage gearboxes look quite different to regular Lockmaster gearboxes and measure only 201mm high. The top of the gearbox is 82mm from the spindle and the gearboxes feature a groove to accept bolt through fixings.

The AutoEngage gearbox is available in 45mm or 55mm backsets and is designed for use on timber and composite doors.

Gearboxes are attached to faceplates with 3 screws and cannot be interchanged with other lockmaster locks.

When measuring the backset, allow 2-3mm for the faceplate, so a 28mm backset gearbox will measure 25mm when not fixed to the strip.

Lockmaster AutoEngage multipoint door locks feature external locking deadlatches which have an activation trigger just above them. On closing the door, the activation snib is triggered as it touches the keep, throwing the deadlatch up to 20mm into the keeps.

Classic locks feature 2 deadlatches, whereas the Heritage version features 3, to provide additional locking in the centre of the door.

Operation: Automatic Locking

To lock the door

1. On closing the door, the latch and locking points are automatically engaged as the triggers on the door connect with the keeps on the frame.

2. Turn the key to deadlock the mechanism.

To unlock the door

1. Turn the key to unlock the mechanism.

2. If you have a lever, push the lever down to retract the locking points. Alternatively, a further quarter turn of the key will retract the latch to open the door.

• This lock is tested to PAS24:2016.
• Corrosion tested to BS EN 1670:2007 Grade 4 for 240 hours
• Endurance tested to 100,000 cycles.

We stock a range of associated products for Lockmaster AutoEngage multipoint door locks, including keeps, spindles, handles and accessories.

You may find this lock used as a timber door lock or a composite door lock.

This Yale YS170 multipoint door lock features 2 Rollers3 Hooks & 1 Latch.

Yale’s newest multipoint lock is the YS170 which features a central hookbolt for increased security and easily reversible latch. This lock features 3 hooks and 2 rollers.

The YS170 is a very popular range of multipoint locks made by Yale. We stock the most popular versions which can be adapted to suit an existing requirement if the alteration is small, or we can source the exact product required.

Yale YS170 locks are fairly easy to identify once removed from the door. The locks are always stamped with the distinctive Yale logo. They feature 92mm PZ (centres) with hook and latch bolt configurations. The hook is below the latch, which distinguishes the gearbox from the Yale G2000 model.

Yale YS170 door locks form part of a range of locks owned by Yale which includes the Yale, Millenco, Millenco Mantis and Lockmaster brands. You may also find these locks are closely related in appearance, but unfortunately they are not interchangeable.

Yale YS170 gearboxes are available in 35mm or 45mm backsets with a split spindle mechanism, which can also be used as a lift lever function by using a solid spindle.

YS170 gearboxes measure 217mm high by backset +18mm. The latch measures 28mm high, as does the deadbolt. The measurement 53mm between the bottom of the latch and the top of the hook, which is 28mm high. The hook throws upwards.

Gearboxes are fitted to faceplates with 3 screw holes. The top to middle screw hole measures 110mm and the middle to bottom measures 52mm.

Lockmaster locks can be found with normal hooks, without anti lift pins. Hooks always throw in opposite directions and the hook cases measure 60mm high.

Rollers are used for compression, to pull the door against the frame, to help prevent dust or water ingress. They do little for security, but they also have the added benefit of helping to prevent the door from becoming warped as it is supported across its full height. This is dependent on the rollers being engaged into their keeps.

Rollers are normally adjustable by 1mm to help achieve optimum weather sealing.

This Yale YS170 multipoint door lock features 3 Hooks & 1 Latch.

The YS170 is a very popular range of multipoint locks made by Yale. We stock the most popular versions which can be adapted to suit an existing requirement if the alteration is small, or we can source the exact product required.

Yale YS170 locks are fairly easy to identify once removed from the door. The locks are always stamped with the distinctive Yale logo. They feature 92mm PZ (centres) with hook and latch bolt configurations. The hook is below the latch, which distinguishes the gearbox from the Yale G2000 model.

Yale YS170 door locks form part of a range of locks owned by Yale which includes the Yale, Millenco, Millenco Mantis and Lockmaster brands. You may also find these locks are closely related in appearance, but unfortunately they are not interchangeable.

Yale YS170 gearboxes are available in 35mm or 45mm backsets with a split spindle mechanism, which can also be used as a lift lever function by using a solid spindle.

YS170 gearboxes measure 217mm high by backset +18mm. The latch measures 28mm high, as does the deadbolt. The measurement 53mm between the bottom of the latch and the top of the hook, which is 28mm high. The hook throws upwards.

Gearboxes are fitted to faceplates with 3 screw holes. The top to middle screw hole measures 110mm and the middle to bottom measures 52mm.

Lockmaster locks can be found with normal hooks, without anti lift pins. Hooks always throw in opposite directions and the hook cases measure 60mm high.