Bramah 3088 Kompact Mortice Deadlock
This Bramah Kompact 3088 deadlock is designed to manually lock the door from one or both sides. When unlocked the door will open when pushed. This deadlock is non-handed and designed for timber doors. Supplied with strike plate and fixings.
£73.90
This Bramah Kompact 3088 deadlock is designed to manually lock the door from one or both sides.
When unlocked the door will open when pushed.
This deadlock is non-handed and designed for timber doors.
Supplied with strike plate and fixings.
Related products
-
British Standard Mortice Locks, Locks & Security, Mortice Locks
TSS Retro Fit British Standard 5 Lever Mortice Deadlock
Quick View
British Standard Mortice Locks, Locks & Security, Mortice LocksTSS Retro Fit British Standard 5 Lever Mortice Deadlock
This British Standard TSS 5 lever mortice deadlock has been designed with the same dimensions as classic mortice dead locks with a 40mm backset. These TSS mortice dead locks meet the requirements of British Standard BS3621:2007.
SKU: n/a -
Mortice Locks, 6 Lever and 5 Lever (non BS) Mortice Locks
Willenhall M5 Non British Standard 5 Lever 2″ Straight 19mm Extended Forend Mortice Sashlock
Quick View
Mortice Locks, 6 Lever and 5 Lever (non BS) Mortice LocksWillenhall M5 Non British Standard 5 Lever 2″ Straight 19mm Extended Forend Mortice Sashlock
The Willenhall M3 mortice sash lock features 5 levers and a narrow body. This version has an extended 175mm forend with either 19mm or 25mm widths.
SKU: n/a -
Door Locks, Metal Door Mortice Lock Cases, Mortice Locks, Multipoint & UPVC, Multipoint Gearboxes
Hooply Genuine Multipoint Gearbox – Key Wind
Quick View
Door Locks, Metal Door Mortice Lock Cases, Mortice Locks, Multipoint & UPVC, Multipoint GearboxesHooply Genuine Multipoint Gearbox – Key Wind
The Hooply multipoint gearbox has Faceplate dimensions of 240mm x 24mm, Centers of 68mm, and a Backset of 60mm. This lock case has Fingerbolts – see HOO002 for the standard deadbolt version. It is commonly used on site containers and security steel doors.
Operation: Key Wind
Latch reversal: Depending on the date of manufacture either:
1. To reverse the latch, undo the screw on top of the lock case and push the silver button up and the latch should pop out. Twist and reinsert the screw.
2. Using a screwdriver or similar insert into the round hole in the back edge of the lock case behind the latch. Push the entire latch bolt forward until the bolt clears the faceplate and can be rotated. Spin the bolt through 180 degrees. remove the screwdriver from the back of the case and the bolt will move back into position.
SKU: HOO001
