Box keep to suit ERA Fortress 261 and 361 deadlock
Related products
-
Door Locks, Metal Door Mortice Lock Cases, Mortice Locks, Multipoint & UPVC, Multipoint Gearboxes
Hooply Genuine Multipoint Gearbox – Key Wind
Quick View
Door Locks, Metal Door Mortice Lock Cases, Mortice Locks, Multipoint & UPVC, Multipoint GearboxesHooply Genuine Multipoint Gearbox – Key Wind
The Hooply multipoint gearbox has Faceplate dimensions of 240mm x 24mm, Centers of 68mm, and a Backset of 60mm. This lock case has Fingerbolts – see HOO002 for the standard deadbolt version. It is commonly used on site containers and security steel doors.
Operation:Â Key Wind
Latch reversal:Â Depending on the date of manufacture either:
1. To reverse the latch, undo the screw on top of the lock case and push the silver button up and the latch should pop out. Twist and reinsert the screw.
2. Using a screwdriver or similar insert into the round hole in the back edge of the lock case behind the latch. Push the entire latch bolt forward until the bolt clears the faceplate and can be rotated. Spin the bolt through 180 degrees. remove the screwdriver from the back of the case and the bolt will move back into position.
SKU: HOO001 -
Mortice Locks, 6 Lever and 5 Lever (non BS) Mortice Locks
Imperial G5000 Non British Standard 5 Lever Mortice Sashlock
Quick View
Mortice Locks, 6 Lever and 5 Lever (non BS) Mortice LocksImperial G5000 Non British Standard 5 Lever Mortice Sashlock
This Imperial 5 Lever mortice sash lock is used on internal and external wooden hinged doors providing a high level of security. These locks are made in England and are pierced to accept 38mm bolt through furniture.
SKU: n/a -
Mortice Locks, 6 Lever and 5 Lever (non BS) Mortice Locks
TWH Legge Replacement 5511 Non British Standard 5 Lever 2″ Mortice Deadlock
Quick View
Mortice Locks, 6 Lever and 5 Lever (non BS) Mortice LocksTWH Legge Replacement 5511 Non British Standard 5 Lever 2″ Mortice Deadlock
This 2″ 5 lever mortice dead lock was originally made by Legge but this is a direct replacement for the original. Please note that this lock no longer meets the requirements of BS3621. It is used on internal and external wooden hinged doors where the stile is too narrow to accept a 2.5″ or 3″ lock.
SKU: n/a
