- Individual levers used to key alike, repair or rekey mortice locks
- N/A
- Individual levers supplied separately without keys
- N/A
Individual levers to suit Union 2177, 2077 and 2277
£2.57 – £3.12Price range: £2.57 through £3.12
Type | Lever No.1, Lever No.2, Lever No.3, Lever No.4, Lever No.5, Lever No.6, Lever No.7 |
---|
The Hooply multipoint gearbox has Faceplate dimensions of 240mm x 24mm, Centers of 68mm, and a Backset of 60mm. This lock case has Fingerbolts – see HOO002 for the standard deadbolt version. It is commonly used on site containers and security steel doors.
Operation:Â Key Wind
Latch reversal:Â Depending on the date of manufacture either:
1. To reverse the latch, undo the screw on top of the lock case and push the silver button up and the latch should pop out. Twist and reinsert the screw.
2. Using a screwdriver or similar insert into the round hole in the back edge of the lock case behind the latch. Push the entire latch bolt forward until the bolt clears the faceplate and can be rotated. Spin the bolt through 180 degrees. remove the screwdriver from the back of the case and the bolt will move back into position.
This 2″ 5 lever mortice sash lock was originally made by Legge but this is a direct replacement for the original. Please note that this lock no longer meets the requirements of BS3621. It is used on internal and external wooden hinged doors where the stile is too narrow to accept a 2.5″ or 3″ lock.
Union L2278 double throw oval sashlock case.
The Hooply 33 Ultra Door Gearbox is very heavy-duty, suitable for steel doors. It is ideal for when only the centre case needs replacing and avoids the replacement of the full multipoint lock unit. It has a 30mm faceplate and 225mm screw centres and is non handed for use with both left hand and right hand applications. Operated by a euro profile cylinder with a 60mm Backset and 68mm centres between spindle and cylinder centres.
Select at least 2 products
to compare